77
GB
Ad
dit
ion
al I
n
fo
rmatio
n
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy
the problem (page 31). However, note that all
memorized settings will be reset to their
factory settings and you will have to readjust
all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
Reference sections for clearing
the receiver’s memory
Specifications
Amplifier section
Power Output
1)
Models of area code SP, MX, E51, AU, AR, TH
Stereo mode output (rated) (6 ohms, 1 kHz,
THD 1%)
90 W + 90 W
1)
85 W + 85 W
3)
Surround mode output (reference)
2)
RMS output
FRONT:
185 W per channel
1)
170 W per channel
3)
(with SS-MSP16)
CENTER:
185 W
1)
170 W
3)
(with SS-CNP16)
SURROUND:
185 W per channel
1)
170 W per channel
3)
(with SS-SRP16)
SURROUND BACK:
185 W
1)
170 W
3)
(with SS-SRP16)
1)
Measured under the following conditions:
2)
Reference power output for front, center, surround
and surround back speakers. Depending on the
sound field settings and the source, there may be
no sound output.
3)
Measured under the following conditions:
To clear
See
All memorized settings
Customized sound fields
Area code
Power requirements
AU, E51, SP, TH
240 V AC, 50 Hz
MX
127 V AC, 60 Hz
AR
230 V AC, 50 Hz
Area code
Power requirements
AR
220 V AC, 50 Hz
continued
