43
GB
Additional Information
No sound or only a very low-level sound is heard
from the surround speakers.
,
Make sur e the sound field function is on (pr
ess
SOUND FIELD MODE).
,
Select the appr
opriate center mode (see pages
25–27).
,
Adjust the speaker volume (see page 18).
,
Make sur e the sur round speaker size parameter is
set to either SMALL or LARGE (see page 16).
No sound is heard from the sub woofer.
,
Make sur e the sub woofer is set to YES (see page
17).
,
Check that 2CH mode has not been selected (see
page 27).
Recording cannot be done.
,
Check that the components ar
e connected cor
rectly .
,
Select the sour
ce component with a FUNCTION
button.
,
When r ecor ding fr om a digital component, make
sur e the input mode is set to ANALOG (see page
23) befor e r ecor ding with a component connected
to the analog MD/T APE ter minals.
Radio stations cannot be tuned in.
,
Check that the antennas ar
e connected secur
ely.
Adjust the antennas and connect an external
antenna if necessar
y.
,
The signal str ength of the stations is too weak
(when tuning in with automatic tuning). Use dir
ect
tuning.
,
Make sur e you set the tuning inter
val cor rectly
(when tuning in AM stations with dir
ect tuning)
(see pages 36 and 45).
,
No stations have been pr
eset or the pr
eset stations
have been clear
ed (when tuning by scanning pr
eset
stations). Pr eset the stations (see page 37).
,
Press DISPLA Y so that the fr
equency appears in
the display .
The surround effect cannot be obtained.
,
Make sur e the sound field function is on (pr
ess
SOUND FIELD MODE).
“PCM--kHz” appears on the display.
,
The sampling fr equency is mor
e than 48 kHz.
Change the input player setting to 48 kHz.
Nothing appears on the display.
,
When the display tur
ns of f immediately after the
receiver is tur ned on, pr ess DIMMER to change the
display mode.
No picture or an unclear picture appears on the
TV screen or monitor.
,
Select the appr
opriate function on the r
eceiver .
,
Set your TV to the appr
opriate input mode.
,
Move your TV away fr
om the audio components.
The remote does not function.
,
Point the r emote at the r
emote sensor
g
on the
receiver .
,
Remove any obstacles in the path between the
remote and the r
eceiver .
,
Replace both batteries in the r
emote with new
ones, if they ar
e weak.
,
Make sur e you select the cor
rect function on the
remote.
,
If the r emote is set to operate the TV only
, use the
remote to select a sour
ce or component other than
TV befor e operating the r
eceiver or other
component.
Reference sections for clearing the
receiver’s memory
To clear
See
All memorized settings
page 14
Customized sound fields
page 32
Summary of Contents for STR-K402 - Fm Stereo/fm-am Receiver
Page 1: ......