1
SERVICE MANUAL
US Model
STR-K7000
MULTI CHANNEL AV RECEIVER
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, both channels driven, from
120 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.7 % total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Power Output
1)
(6 ohms 1 kHz, THD 10 %)
FRONT
2)
:
140 W/ch
CENTER
2)
:
140 W
SUR
2)
:
140 W/ch
1) Measured under the following conditions:
Area code
Power requirements
US
120 V AC, 60 Hz
2) Depending on the sound field settings and the source,
there may be no sound output.
SPECIFICATIONS
Inputs (Analog)
MULTI CH IN,
Sensitivity: 800 mV
SA-CD/CD,
Impedance: 50 kohms
MD/TAPE, DVD,
VIDEO 1, 2, 3
Inputs (Digital)
DVD (Coaxial)
Sensitivity: —
Impedance: 75 kohms
VIDEO 1, 2
Sensitivity: —
(Optical)
Impedance: —
Outputs (Analog)
MD/TAPE (OUT),
Voltage: 800 mV
VIDEO 1 (AUDIO
Impedance: 10 kohms
OUT)
SUBWOOFER
Voltage: 2 V
Impedance: 1 kohms
Reproduction frequency range:
28 – 20,000 Hz
Tone
Gain levels
±6 dB, 1 dB step
9-887-150-01
2006C04-1
© 2006. 03
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are trademarks
of Digital Theater Systems, Inc.
The XM name and related logos are registered
trademarks of XM Satellite Radio inc.
– Continued on next page –
• STR-K7000 is the multi
channel AV receiver
section in HT-7000DH.
