10
STR-K870P
Notes
• The AUX, MULTI CH and 12 buttons on the remote
are not available for receiver operation.
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
• When you press input buttons (VIDEO1, VIDEO2,
VIDEO3 or DVD), the input mode of the TV might
not switch to the corresponding input mode that you
want. In this case, press TV/VIDEO button to switch
the input mode of the TV.
• To activate the buttons with orange printing, press
ALT first before pressing the buttons.
Set the remote command mode using the
RM SET UP button and the remote command
mode buttons.
Selecting the command mode
You can switch the command mode (AV1 and
AV2) of the remote. If the command mode of the
receiver and the remote is different, you cannot
use the remote to operate the receiver. To
change the command mode of the receiver, see
page 53.
Press AV1 (or AV2) while holding down
RM SET UP.
The indicator flashes once (twice for AV2) ,
then the command mode switches.
To check the command mode of
the remote
Press RM SET UP. You can check the remote by
the indicator.
To reset the remote to factory
settings
Press
?/1
, AV
?/1
and MASTER VOL – at
the same time.
The indicator flashes 3 times, then goes off.
Remote
Button
Operations
Function
O
qa
VCD player/
LD player/
DVD player/
Blu-ray disc
recorder/Hard
disc recorder/
PSX/Satellite
tuner
Returns to the
previous menu or
exits the menu.
V
/
v
qa
Receiver
Selects a menu item.
B
/
b
qa
Receiver
Adjusts or changes the
setting.
V
/
v
/
B
/
b
qa
VCR/
DVD player/
Blu-ray disc
recorder/Hard
disc recorder/
PSX/Satellite
tuner
Selects a menu item.
Selecting the command
mode of the remote
Mode
Indicator flashes
AV1
once
AV2
twice
Summary of Contents for STR-K870P
Page 57: ...57 STR K870P MEMO ...
