GB
20
The 3-step workaround process is as follows;
Step 1 Re-check Channel Allocation
Make sure that the channel allocation in the theater follows the fundamental allocation rules
(page 18). Also, see “Channel Allocation Examples” (page 23).
After channel allocation, make sure that the transmitters for all the screens are running and no
crosstalk or interference occurs at any of the screens. If the problem is not solved, another
wireless device may be causing the problem. In this case, try Step 2 or Step 3.
Step 2 Use Workaround 1: Replace With Unallocated Channel
1. Check for available unallocated channel-pairs.
In the illustration below, G6 and Y6 are an unallocated channel-pair.
Unallocated channels
G1
G2
G3
G4
G5
G7
Y4
Y4
Y5
Y7
Y1
Y2
Y3
G1
G6
Y6
#Y
#Y
