![background image](http://html.mh-extra.com/html/sony/su-pt2m/su-pt2m_instructions-manual_415952006.webp)
SU-PT2M
4-099-468-12 (1)
6
(GB)
Install the TV
WARNING
If you allow the mains lead to be pinched under or between pieces of equipment, this may result in a short
circuit or an electric shock. If you stumble over the mains lead or the connecting cable, the stand may topple
over and cause injury.
Decide on the installation location and lay the stand down before installing the TV.
Since the TV is heavy, it is recommended that you decide on the installation location beforehand and lay the
Tabletop Stand down there before installing the TV.
Note
Do not push or pull the Tabletop Stand while it is on the floor. The rubber footings on the base of the stand may
come off.
1
Attach the Tabletop Stand to the TV.
1
Place the TV, with its screen facing down, on a stable, cloth-covered work surface, at least 20 cm off the
floor.
2
Insert the dowels of the Tabletop Stand in the slots of the TV.
2
Secure the TV and the Tabletop Stand with the supplied screws.
Note
When using an electric screwdriver, set the torque setting to about 1.5N·m.
1
2
At least
20 cm
Rear side of the TV
Soft rag
Bottom of the TV
Slots
Securing screw