Sony SU-PW3M, Installation Manual

11

4

Install the Mounting Rack (with
the TV) onto the Plate Unit.

1

Hold the Mounting Rack so that the two
centre notches on either side touch the
support braces of the Plate Unit.

2

Gradually lift the Mounting Rack and TV
upward keeping the centre notches engaged
with the support braces of the Plate Unit.
Hitch the upper left and right hooks of the
Mounting Rack onto the anchor bars at the
top of the left and right stabiliser arms of the
Plate Unit.

3

Confirm the four upper hooks are firmly
hooked onto the two anchor bars of the Plate
Unit and that the support braces are secured
in the center notches of the Mounting Rack.

4

Firmly tighten all four upper and lower
screws (+B6 

×

 L20, supplied) on each side of

the Mounting Rack.

1

2

1

2

Mounting Rack

Side view

Plate Unit

Mounting Rack
with the TV

Support brace

Confirming the
completion of the
installation

Check the following points.

• Four upper hooks of the Mounting Rack are

firmly hooked onto the two anchor bars of
the Plate Unit.

• The lead and the cable are not twisted or

pinched.

• All the securing screws (+B6 

×

 L20, supplied)

are tightened.

WARNING

Incomplete installation may cause the product falling
and result in injury or product damage. Also, improper
placement of the mains lead, etc., may cause fire or
electric shock through a short circuit.
Be sure to confirm the completion of the installation for
safety.

Right side

4

Screws
(+B6 

×

 L20, supplied)