13
2
Connect external equipment
cables to the TV.
3
Restore the TV to the non-tilted
position.
1
Unfasten the screws tightened at the outer
sides of the bottom left and right hooks of the
Mounting Rack in step
5
of procedure 1.
2
Hold the bottom left and right of the TV and
pull it out toward you so that the support
braces are unlocked from the bottom hooks
on the Mounting Rack.
Notes
• Do not hold the transparent part of the TV.
• Do not let go of the TV while lifting it, otherwise
the TV may hit the wall and cause damage.
3
Grasp the protruding part of the support
braces with your other hand and slide it
upward so that the support braces and the
TV are restored in the untilted position.
4
Tighten the securing screws.
5
Confirm that all the cables connected to the
TV are not twisted or pinched, and then plug
in the mains lead.
WARNING
• Be sure two or more people do this work.
• Be careful not to pinch your hands or fingers.
When connecting the
external equipment to
the TV after installation
1
Tilt the TV upward.
1
Unplug the mains lead.
2
Unfasten the two securing screws at the
bottom of the Mounting Rack which were
secured in step
4
of procedure 4 on page 11.
3
Hold the bottom left and right of the TV and
gradually lift it upward.
Notes
• Do not hold the transparent part of the TV.
• Do not let go of the TV while lifting it, otherwise
the TV may hit the wall and cause damage.
4
Confirm the two support braces of the Plate
Unit are locked into the bottom left and right
hooks on either side of the Mounting Rack.
5
Insert the screws removed in step
2
into the
screw holes on the outer sides of the bottom
left and right hooks of the Mounting Rack
and tighten firmly to lock the support braces.
To Customers, Sony Dealers
2
3
Support
braces
Screw hole for fixing the
support braces
3
Summary of Contents for SU-PW3M
Page 16: ...Printed in Japan ...
