Sony SU-PW3M, Installation Manual

7

Align the unit so that it is exactly level.

Plate Unit

2

Referring to the paper template
and page 15, determine the
positions of the screws.
If you intend to route the cables
in the wall, also determine the
position of the cable hole and
bore a hole in the wall.

WARNING

The wall that the TV will be installed on should be
capable of supporting a weight of at least four times
that of the TV (page 15).
Make sure of the strength of the wall the TV will be
installed on. Reinforce the wall sufficiently, if
necessary.

Step 3:
Installing the Plate Unit
on the wall

1

Fix the Plate Unit to the wall
using four or more M8 (or
equivalent) screws (not
supplied).

Select at least four screw holes with the same
mark shown in the diagram below, and tighten
the screws securely so that they will not come
loose.

WARNING

• The screws securing the Wall-Mount Bracket to the

wall are not supplied.

• Be sure to use the appropriate screws, depending on

the material and structure of the wall.

• If the Plate Unit cannot be attached securely

enough, use additional screws.

• Be sure to confirm that the Plate Unit is securely

fixed to the wall.