Sony SU-PW3M, Installation Manual

8

Step 4:
Preparing for the
installation of the TV

1

Spread a soft cloth on the floor
and place the TV on it with the
screen face down.

Notes

• Be sure that two or more persons hold the TV when

carrying it. Do not hold the transparent parts at
either the top or bottom of the TV.

• Do not place the TV face down for an extended

period as damage may occur to the front surface.

2

Remove four screws on the rear
side of the TV.

2

Adjust the angle of the stabiliser
arms.

When installing the TV perpendicularly (0
degrees), adjustment of the arms angle (step 

1

and 

2

 below) is not necessary. Make sure that

each stabiliser arm is screwed in securely.

1

Remove the screws that are at the top and
bottom center of the both stabiliser arms.
Then choose the notch corresponding to the
desired angle (5,10,15 or 20 degrees) and fit
the stabiliser arm to it.

2

Firmly secure each stabiliser arm using the
screws removed in step 

1

.

Notes

• Be sure to adjust the angles of the right and left

arms to the same angle.

• Be careful not to pinch your fingers when adjusting

the angle of arms.

• When using an electric screwdriver, set the torque

setting to approximately 2 N·m.

Soft cloth

2

1

• 0 degrees: Leave the white screws tightened as they

are.

• Other than 0 degrees: Remove the white screws.

Stabilizer arm