9
3
Attach the supplied four hooks
with the four supplied screws
(+PSW5
×
L14).
Note
When using an electric screwdriver, set the torque
setting to approximately 2 N·m.
Step 5:
Installing the TV
WARNING
Be sure to complete the installation before connecting the
mains lead to the wall socket. If you allow the mains lead
to be pinched under or between pieces of equipment, this
may result in a short circuit or an electric shock.
Be careful not to stumble over the mains lead or the TV,
as you may hurt yourself.
1
Change the position of the
woofer speaker.
1
Loosen the four screws (two on each side of
the strut arms) used to secure the woofer
speaker in place about three turns.
2
Slide the woofer speaker upward completely
as shown below.
3
Retighten the four screws (loosened in step
1
) to secure the woofer speaker.
Note
If you fail to slide the woofer speaker completely in
step
2
, the woofer speaker connector locating at the
centre bottom of the rear side of the TV and
ventilation holes will be blocked resulting in product
damage.
Loosen (but do not
remove) the screws.
Soft cloth
Summary of Contents for SU-PW3M
Page 16: ...Printed in Japan ...