Other Information
74
F:\Worker\SONY SXRD-R\2699721111(062606)\060SPC.fm
masterpage:3 columns Right
KDS-R60XBR2/KDS-R70XBR2
2-699-721-
11
(1)
Sound
Channels
Problem
Possible Remedies
Good picture, no sound
❏
Press
MUTING
so that
Muting
disappears from the screen (see page 29).
❏
Make sure the
Speaker
option is set to
On
in the
Sound
setting (see page 53).
❏
Make sure the
MTS
option is set to
Stereo
or
Mono
❏
When the HDMI IN input is in use, surround sound, such as AC-3 and DTS,
cannot be input. Change the sound setting for the external input device to Linear
PCM.
Audio noise
❏
Make sure that the antenna is connected using the 75-ohm coaxial cable.
❏
Keep the antenna cable away from other connecting cords.
❏
To avoid TV interference, make sure to use an undamaged antenna cable.
Cannot gain enough volume
when using a cable box
❏
Increase the volume of the cable box using the cable box’s remote control. Then
press
TV
(
FUNCTION)
once (the TV indicator lights up) and adjust the TV’s
volume.
Sound seems weak or
insufficient
❏
The TV’s audio might be set to
Auto SAP
or
Mono
, when it might be better set to
Stereo
. In the
Sound
setting (see page 52), set the
MTS
setting to
Stereo
. If
already set to
Stereo
, switch to
Mono
(which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on
external speakers
❏
If the
Speaker
option is set to
Off
and the
Audio Out
option is set to
Fixed
(in
order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 53). Or, to use the TV remote control, set the
Audio Out
option to
Variable
.
❏
To turn on the TV speakers, set the
Speaker
option to
On
No audio for HDMI
❏
Confirm DVD player, set-top box audio settings. Select 2 channel LPCM audio.
❏
The DVI connector is for video signals only. Connect the DVI jack to the HDMI
IN 8 jack, using the HDMI-to-DVI cable and/or adapter. Connect the audio jack to
the AUDIO IN (L/R) jacks on the HDMI IN 8 (see page 24).
Problem
Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna
❏
Press
ANT
to select the VHF/UHF input (see page 28).
❏
Use
Auto Program
in the
Channel
setting to add receivable channels that are not
presently in the TV’s memory (see page 56).
Cannot receive any channels
when using cable TV
❏
Use
Auto Program
in the
Channel
setting to add receivable channels that are not
presently in the TV’s memory (see page 56).
❏
Press
ANT
to select the CABLE input (see page 28).
Cannot receive or select
channels
❏
Use
Auto Program
in the
Channel
setting to add receivable channels that are not
presently in TV memory (see page 56).
Some digital cable channels are
not being displayed
❏
Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
❏
The digital cable channel may be set to
Hidden
in the
Channel
setting (see page
56).
