SERVICE MANUAL
MULTI-CANNEL INTEGRATED AMPLIFIER
SPECIFICATIONS
TA-DA9000ES
Ver 1.0 2003.10
9-961-291-01
Sony Corporation
2003J05-1
Home Audio Company
C
2003.10
Published by Sony Engineering Corporation
AEP Model
E Model
– Continued on next page –
This amplifier incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
*
Laboratories.
Dolby , Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
** DTS , DTS-ES Extended Surround , and
Neo:6 are trademarks of Digital Theater Systems,
Inc.
Manufactured under license from Dolby
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode
1)
(8 ohms, 20 Hz
−
20 kHz, THD 0.15%)
200 W + 200 W
(4 ohms, 20 Hz
−
20 kHz, THD 0.15%)
220 W + 220 W
Reference Power Output
(8 ohms, 1 kHz, THD 0.09%)
FRONT
2)
: 200 W + 200 W
CENTER
2)
: 200 W
SURR
2)
: 200 W + 200 W
SURR BACK
2)
: 200 W + 200 W
(4 ohms, 1 kHz, THD 0.09%)
FRONT
2)
: 220 W + 220 W
CENTER
2)
: 220 W
SURR
2)
: 220 W + 220 W
SURR BACK
2)
: 220 W + 220 W
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Frequency response
Inputs (Analog)
3) Input shorted and sealed at VOL MAX.
4) Weighted n 20 kHz LPF, input level.
Area code
Power requirements
CEL
230 V AC, 50/60 Hz
TW
110 V AC, 60 Hz
KR
230 V AC, 60 Hz
PHONO
RIAA equalization curve
±
0.5 dB
Power Amp Block
10 Hz
−
50 kHz
±
3 dB (8 ohms)
PHONO
Sensitivity: 3.5 mV
Impedance: 50 kilohms
S/N
3)
: 90 dB (A, 40 mV
4)
)
CD/SACD, TAPE,
MD/DAT, DVD, LD,
TV/SAT, VIDEO 1, 2,
3, 4, 5
Sensitivity: 170 mV
Impedance: 50 kilohms
S/N
3)
: 100 dB (A, 2V
4)
)
Inputs (Digital)
Outputs
EQUALIZER
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO:Y: 1 Vp-p, 75 ohms
P
B
/C
B
/B-Y: 0.7 Vp-p, 75
ohms
P
R
/C
R
/R-Y: 0.7 Vp-p, 75
ohms
CD/SACD, DVD, LD,
VIDEO 1, TV/SAT
(Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A Network, 20 kHz LPF)
CD/SACD, DVD, LD,
TV/SAT, MD/DAT,
VIDEO1, 3 (Optical)
S/N: 100 dB
(A Network, 20 kHz LPF)
TAPE, MD/DAT
(REC OUT), VIDEO
1, 2, 3 (AUDIO OUT)
Voltage: 170 mV
Impedance: 2.2 kilohms
FRONT L/R,
CENTER,
SURROUND L/R,
SURROUND BACK
L/R, SUB WOOFER
Voltage: 2 V
Impedance: 220 ohms
Gain levels
±
10 dB, 1 dB step
