To charge your device
1
Plug the charger into a power outlet.
2
Plug one end of the USB cable into the charger (or into the USB port of a
computer).
3
Plug the other end of the cable into the micro USB port on your device, with
the USB symbol facing up. The notification light lights up when charging starts.
4
When the notification light is green, the device is fully charged. Disconnect the
USB cable from your device by pulling it straight outwards. Make sure not to
bend the connector when removing the cable from the device.
If the battery is completely discharged, it may take a few minutes before the notification light
lights up after you connect the charger cable to a power source.
Battery notification light status
Green
The battery charge level is greater than 90%
Flashing red
The battery level is low
Orange
The battery is charging and the battery charge level is less than 90%
To check the battery level
1
From your
Home screen
, tap .
2
Find and tap
Settings
>
About tablet
>
Status
>
Battery level
.
Improving battery performance
The following tips can help you improve battery performance:
•
Charge your device often. This will not affect the lifetime of the battery.
•
Downloading data from the Internet is power consuming. When you're not using the
Internet, you can save power by disabling all data connections over mobile networks.
This setting does not prevent your device from transmitting data over other wireless
networks.
•
Turn off Bluetooth® and Wi-Fi® connections when you don't need these features.
You can turn them on and off more easily from the Notification panel by dragging
down the status bar.
•
Use the
STAMINA mode
and
Low battery mode
features to reduce battery
consumption. You can select the power saving mode that best suits the way you use
your device. You can also customise the settings of each power saving mode.
14
This is an Internet version of this publication. © Print only for private use.