6
Playing a tape
You can use any type of tape, TYPE I
(normal), TYPE II (CrO
2
) or TYPE IV (metal),
since the tape deck automatically detects the
tape type (ATS
1)
).
1)
ATS: Automatic Tape Selection.
1
TAPE
P
With the side you want
to play facing up
FUNCTION
TAPE
ª
/
·
TAPE
p
TAPE
0
/
)
2)
This tape deck is equipped with the Dolby B-type
noise reduction system.
1
Press POWER on the DHC-MD313
to turn on the DHC-MD313
component system.
The tape deck turns on automatically.
2
Insert a recorded tape.
3
Set DIRECTION to
A
to play one
side. Set it to
a
3)
to play both
sides.
4
Press
·
.
Press
ª
to play the bottom side.
FUNCTION switches to “TAPE”
automatically, then the tape starts
playing.
3)
The tape deck stops automatically after repeating
the sequence five times.
To play a tape using the DHC-
MD313 component system
Do the following operation in step 4;
1
Press FUNCTION until “TAPE” appears in
the display.
2
Press TAPE
·
on the remote.
To play the bottom side, press TAPE
ª
on
the remote.
VOLUME
2
3
DOLBY NR
2)
Cassette
indicator
π
º/‚
ª
§
∏
4
Tape deck
TC-TX313
The remote
supplied with
the DHC-MD313
