7
To
Stop playing
Pause
Fast-forward
Rewind
Find the
succeeding
track (AMS**)
Find the
preceding track
(AMS**)
Remove the
cassette
Adjust the
volume
Press
π
(or TAPE
p
*).
∏
(or TAPE
P
*).
Press again to resume playing.
π
, then
‚
(or TAPE
)
*) for
the top side.
π
, then
º
(or TAPE
0
*) for
the bottom side.
π
, then
º
(or TAPE
0
*) for
the top side.
π
, then
‚
(or TAPE
)
*) for
the bottom side.
‚
(or TAPE
)
*) for the top
side.
º
(or TAPE
0
*) for the
bottom side.
º
(or TAPE
0
*) for the top
side.
‚
(or TAPE
)
*) for the
bottom side.
§
on the tape deck.
/– on the remote
(or turn VOLUME on the DHC-
MD313).
* Use the remote supplied with the DHC-MD313.
**The Automatic Music Sensor (AMS) feature
detects a blank space of more than four seconds
between tracks to locate tracks quickly.
Tips
• When you press POWER on the tape deck, only
the tape deck turns on. Press POWER on the
DHC-MD313 to turn on the DHC-MD313
component system.
• The cassette indicator lights up in red when a
cassette is inserted and goes off when no cassette
is inserted.
• Pressing
·
or
ª
when the tape deck is off
automatically turns on the tape deck and starts
playing a tape if there is a cassette inserted (
One
Touch Play
).
• Inserting the tape when the power is off
automatically turns on the tape deck only. Press
POWER on the DHC-MD313 to turn on the DHC-
MD313 component system.
• You can switch from another source to the tape
deck just by pressing
·
or
ª
(
Automatic
Source Selection
).
• To start playing automatically from the beginning
of the tape after fast winding (
Auto Play
), press
·
while holding down
º
(for the top side) or
press
ª
while holding down
‚
(for the bottom
side).
• When you want to reduce the hiss noise in low-
level high-frequency signals, set DOLBY NR to
ON.
• Using the timer function on the DHC-MD313, you
can wake up to music at a preset time. For details,
refer to “Wake up to music” in the DHC-MD313
component system Instruction Manual. When you
set the Wake-up timer, DOLBY NR must be set on
the tape deck.
Note
The AMS feature may not work in the following
cases:
— the blank space between tracks is four seconds
or less.
— the sound source recorded on the right
channel is different from that on the left
channel as with a KARAOKE tape.
— low volume or low sound continues for a long
time.
— the TV is too close to the tape deck.
Other operations
