TCM-500DV
3
3-1.CABINET REAR ASSY (500), "LID ASSY (500), CASSETTE"
Note:
Follow the disassembly procedure in the numerical order given.
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
Cabinet (Front) assy (500)
MAIN board
Lid assy (500), Casette
Head, Magnetic (Rec/Pb/Erase) (HRPE901), Belt (AR),
Capstan/Reel Motor (M601)
LED board
SP board
Set
Cabinet Rear assy (500)
Mechanism Deck
qa
5
qg
Lid assy (500), cassette
6
Flexible doard (CN201)
Cabinet (front) assy (500)
2
Screws (B1.7 x 9)
3
Screws (1.7 x 16)
4
Claws
8
Strap, hand
1
Foot (B)
7
Cabinet rear assy (500)
0
Screw (B1.7 x 3)
9
Flexible board (CN401)
Returning lever
Note on Assembling "Lid Assy (500),
Cassette"
On assembling the lid assy (500),
cassette, insert the one side of the l
id spring to the hole on the lid assy,
and fit the other side to the cabinet
(front) assy (500) as shown in the
figure.
qs
Remove the "lid assy (500),
cassette" while pushing the
pivot with a phillips-head
screwdriver or the like.
qd
Remove the returning lever from the
pivot of the "lid assy (500), cassette"
while inserting a screwdriver between
the "lid assy (500), cassette" and the
returning lever.
qf
Remove the "lid assy (500), cassette"
while pushing the pivot with a phillips-
head screwdriver or the like.
