Getting Started
4
Getting Started
1.
Connect your aerial lead to the socket labelled
DIGITAL
on the rear of
the TV.
2.
Connect the supplied RF lead from the socket labelled
on the rear of
the TV to the socket labelled IN* on your VCR.
3.
Connect an RF lead from the socket labelled OUT* on your VCR to the
socket labelled
ANALOGUE
on the rear of the TV.
4.
Connect the supplied scart lead from the socket labelled
i
3/
r
3 on the
rear of the TV to the audio/video sockets labelled TV* on your VCR.
5.
Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button.
This enables the TV to locate and store the video channel during the
‘Automatically tuning the TV’ procedure.
Connecting an aerial only
1.
Connect your aerial lead to the socket labelled
DIGITAL
on the rear of
the TV.
2.
Connect the supplied RF lead from the sockets labelled
and
ANALOGUE
on the rear of the TV.
z
*Socket names may vary depending on make and model of VCR. Refer to your
VCR instruction manual for details.
Supplied RF lead
Rear of VCR
Supplied Scart lead
V/L/R connectors
Rear of TV
Connecting an aerial and VCR
3
Y/U/V connectors
