KV-21FT250
KV-21FT250
17
1) Dress DY Conn along Conn Assy, 5P (200V) as shown.
2) Dress DY Conn and Conn Assy, 5P (200V) with Purse Lock Ø5.
Note : Kept DY Conn & Conn Assy, 5P away from FBT area by a distance of 10mm or more.
1
2
DY
Earth Assy, Coating
Purse Lock Ø5
Conn Assy
,
5P
(200V)
DY
Conn
Conn Assy, 5P
DY Conn goes above Conn Assy, 5P
DY Conn goes underneath of Earth
Assy, Coating and Conn Assy, 5P
Make sure DY Conn is on the
right side of Earth Assy,
Purse Lock Ø5
≥ 10mm
Use heat sink height to
estimate purse lock location
Dress DY Conn and Conn Assy, 5P
(200V) with Purse Lock Ø5.
TVSR Requirement :
All wires must be kept away from
FBT area by a distance of 10mm or
more.
CAUTION:
Do not overpull the wires during dressing --> avoid disconnection
of wire.
3
2-9. DY WIRE DRESSING
