KV-21FT250
KV-21FT250
25
4-2. ACCESSING THE SERVICE MENU MODE
Use the remote commander to access the service meu mode and perform the following adjusments.
1. Standby mode (Power off).
2. Press the following buttons on the remote commander within a second of each other:
DISPLAY
Channel 5
Sound Volume +
POWER
The screen displays the fi rst service data category item.
item no.
service data
NVM
field
channel no./
category
in decimal
item name
in decimal
NG
service command
frequency
video input name
GEOM
000
HPOZ
055
x
SERVICE
60
VIDEO 1
software
service data
reserved
power on time
release ID
version
in binary
for factory
color system
(decimal)
STR31
7.11U
0011 1111
FF FF
- - - - -
00084
Status Byte
Status Byte
Flash DCXO
#1 SSD
#2 SSD
000 00 00 0000
3E
40 000
004000
0000FF
1. On the Remote Commander press 2 to select the next category, or 5 to select the previous category.
2. Press
1 to select the next item, or 4 to select the previous item.
3. Press
3 to increase the data value, or 6 to decrease the data value.
4. Press
MUTING then 0 to write into memory.
GREEN
GEOM
000
HPOS
039
SERVICE
50
VIDEO 1
write with
[MUTING]
.
GREEN
GEOM
000
HPOS
039
WRITE
50
VIDEO
1
GEOM
000
HPOS
039
WRITE
50
VIDEO
1
Write executed with
-
.
RED
“WRITE” becomes red
when saving, then changes
to “SERVICE”
“WRITE” displays when
saving changes
Resetting the User Menus
Use the following procedure to reset the User Menus to the factory default settings.
1. Access
Service
Adjustment
Mode.
2. Press
8 then 0 on the Remote Commander.
