19
Menu Adjustment
Sony KV-BT212M80 Group I6 (GB Dummy)_2-178-087-E1 (1)
Presetting channels manually
1
After selecting “Manual Program”, select the program
number to which you want to preset a channel.
(1) Make sure “Program” is selected, then press
.
(2) Press
V
or
v
until the program number you want
to preset appears on the menu, then press
.
2
Select the desired channel.
(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press
.
(2) Press
V
or
v
until the desired channel’s broadcast appears on the TV screen,
then press
.
3
If the sound of the desired channel is abnormal, select the appropriate TV
system.
(1) Press
V
or
v
to select “TV System”, then press
.
(2) Press
V
or
v
until the sound becomes normal, then press
.
4
If you are not satisfied with the picture and sound quality, you may be able
to improve them by using the “Fine” tuning feature.
(1) Press
V
or
v
to select “Fine”, then press
.
(2) Press
V
or
v
to select “Manual”, then press
.
(3) Press
V
,
v
,
B
or
b
until the picture and sound quality are optimal, then press
.
The + or – icon on the menu flashes while tuning.
5
If you want to skip this program number when using PROG +/–, you can
select the “Skip” feature.
(1) Press
V
or
v
to select “Skip”, then press
.
(2) Press
V
or
v
to select “On”, then press
.
To cancel, select “Off”, then press
.
6
If the TV signal is too strong (picture distorted; picture with lines; signal
interference) or weak (snowy picture), you may be able to improve the
picture quality by setting the “Signal Booster” feature.
(1) Press
V
or
v
to select “Signal Booster”, then press
.
(2) Press
V
or
v
to select “Off” (for picture distorted; picture with lines; signal
interference) or “Auto” (for snowy picture), then press
.
VHF Low
Fine:
Auto
Skip:
Off
Signal Booster: Auto
TV System:
D/K
Program:
Manual Program
Confirm
End
Select
01
