Getting Started
6
-EN
Connecting the 3D WOOFER
1
Attach the 3D WOOFER into the footholds on the top of the TV.
2
Connect the wires to the 3D WOOFER (8
Ω
) terminals at the rear of the TV.
The red wire should be connected to the
‘
red terminal and the black wire to the
’
black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise the TV may malfunction.
• Unplug the TV from the wall outlet when connecting the 3D WOOFER.
• Make sure that none of the 3D WOOFER wire strands stick out, making contact with the neighbouring speaker terminal, to prevent a
malfunction caused by a short circuit of the terminals.
Connecting a VHF antenna or a combination VHF/UHF antenna
— 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable.
Plug the connector into the
(antenna) socket at the rear of the TV.
Connections
Getting Started
Red wire
Black wire
1
2
3D WOOFER
Rear of TV
Rear of TV
or
On a wall