13
Get
ting S
ta
rt
e
d
Step 3: Easy Setup
1
Connect the supplied AC adaptor and AC
power cord (mains lead) in the numeric
order shown below. When removing
them, do so in reverse order.
2
Press
to turn on the player. Power
indicator lights up.
3
Turn on the TV and press -TV-
button
on the remote to set the input selector.
This will show the signal from the player
on your TV screen.
4
Perform [Easy Setup].
Follow the on-screen instructions to make
the basic settings using
/
/
/
and
press ENTER on the remote.
• When [Easy Setup] is complete, the player will
automatically find the available network.
• If there is no output or black screen appears,
refer to “Troubleshooting” (page 22).
The home screen appears when you press
HOME. Select an application using
/
,
and press ENTER.
The following three applications are
displayed on the home screen.
(Disc):
Plays a disc.
[USB device]:
Plays content from a USB device.
[Setup]:
Adjusts the player’s settings.
When turned on for the first time
Wait for a short while before the player
turns on and starts [Easy Setup].
to DC IN 12 V
AC adaptor (supplied)
AC power cord (mains lead)
(supplied)
to mains
ENTER
/
/
/
Home screen display
USB
4K Ultra HD
What Happened to Mo
Setup
Application
