background image

Printer Paper / Loading Paper in the Printer

7

Printer Paper

Use only Sony UPP-110S/110HD/110HG paper 
designed for use with this printer. High print quality 
cannot be guaranteed if any other paper is used with this 
printer, and such paper could damage the printer.
Printer paper intended for use with the UP-D890 
cannot be used with the UPP-110HA.

Print Paper You Can Use

Print paper characteristics are as follows.

Storing and Handling Paper

• Stored unused paper at a temperature below 30°C 

(86°F) in a dry location that is not exposed to direct 
sunlight.

• Do not store unused paper near volatile liquids or 

allow the paper to contact any organic volatile liquid, 
cellophane tape, or any compound of vinyl chloride.

• Handle the paper carefully when loading to avoid 

touching the printing surface with your fingers. 
Perspiration or oil from you hands could cause 
pictures to blur.

• After removing the label from the leading edge of the 

paper, pull the paper out 15~20 cm (about 6~8 in.) 
before printing. Label adhesive remaining on the 
paper could spoil a picture.

• To prevent printed pictures from fading or changing 

color, store them in a cool, dry location where the 
temperature is not higher than 30°C (86°F).

• Store printed pictures in a polypropylene pouch or 

between sheets of paper that contain no plastic.

• Do not store printed pictures where they will be 

exposed to direct sunlight or high humidity.

• Do not store printed pictures near volatile liquids or 

allow the prints to contact any organic volatile liquid, 
cellophane tape, or any compound of vinyl chloride.

• To prevent fading, stack prints on or under a diazo 

copy sheet.

• To mount prints on another sheet of paper, use double-

sides tape or a water base adhesive.

• Do not incinerate waste printer paper.

Loading Paper in the 
Printer

Notes

• Before loading paper in the printer, see “Storing and 

Handling Paper” (on page 7).

• Always handle print paper carefully when loading to 

avoid adversely affecting the quality of the printed 
pictures. Never bend or crease the paper and never 
touch the printing surface with your fingers. 
Fingerprints perspiration can blur printing.

• Do not use any paper other than UPP-110S/110HD/

110HG paper. (page 7)

• Confirm that the PAPER TYPE switch is set correctly 

for the type of paper loaded in the printer. (page 4)

Loading Paper

1

Press the power ON/OFF switch to turn the printer 
on. The POWER lamp lights.

2

Press the OPEN button to open the paper door.

Print Characteristics

Paper Type

TYPE I (Normal)

UPP-110S

TYPE II (High Density)

UPP-110HD

TYPE V (High Glossy)

UPP-110HG

Summary of Contents for UP-D895MD















Reviews: