background image

Various Functions

32

Various Functions

Using the Camera with Batteries

You can operate the camera with the inserted NH-AA 
batteries. To use the camera with the batteries, charge 
the batteries using the supplied battery charger.
The batteries may not be fully charged when they are 
used for the first time or they have not been used for a 
long period of time. In such a case, repeat charging and 
discharging a few times.

For details on discharging, see “Refreshing batteries” 
on page 33.

Notes

• Operation time of the batteries varies according to the 

temperature and operating conditions. It is 
recommended to use fully charged batteries or an AC 
power adaptor to shoot pictures securely.

• When the built-in flash lights, battery power is quickly 

consumed. Charging the flash with the batteries 
requires longer time than charging it with the AC 
power adaptor.

Charging batteries

1

Put the batteries in the battery charger with the 
correct polarity.

2

Connect the battery charger to the wall outlet.

The CHARGE lamp lights, and charging begins. It 
takes about 230 minutes to charge four batteries.
When the batteries are fully charged, the CHARGE 
lamp goes out.

3

Disconnect the battery charger from the wall outlet, 
and remove the batteries.

Notes

• Do not charge batteries other than the NH batteries. 

Otherwise the batteries may be damaged.

• Insert the batteries firmly.
• When charging batteries that have not been used for a 

long period of time, charging may stop before they are 
fully charged. In such a case, disconnect the battery 
charger from the wall outlet, and reconnect it to start 
charging again. Then the batteries may be fully 
charged.

• Charge batteries that are used out.
• Charge the batteries in a place with an ambient 

temperature between 10°C and 30°C (50°F to 86°F).

• Be sure to connect the battery charger securely.
• Do not insert or remove batteries with the battery 

charger connected to the wall outlet.

• The battery charger and batteries may become hot 

during charging, but this is not a malfunction.

• After charging batteries, they become very hot. Be 

careful about touching them. 

• During charging, a TV, radio or tuner may receive 

noise. In such a case, use a wall outlet far from the TV, 
radio or tuner.

Ni-MH

BATTERY CHARGER

AA OR AAA SIZE

Battery charger

Batteries

Ni-MH

BATTER

Y CHARGER

AA OR AAA 

SIZE

CHARGE lamp

to wall outlet

Summary of Contents for UPX-C200

















































































































































































































Reviews: