Sony URX-S03D, Operating Instructions Manual

5

Preparation

Attaching to a Camcorder

This receiver can be inserted into a slot provided on 
compatible Sony camcorders.

1

Remove the cover from the slot for the wireless 
receiver on the camcorder, and insert the receiver into 
the slot.

To avoid inserting the receiver in the wrong direction, 
confirm the location of the mounting screws before 
inserting the wireless receiver.

2

After inserting the receiver completely into slot, 
securely fasten the four mounting screws.

Using Wireless Adapters

Attaching the unit to an optional DWA-01D or DWA-
F01D wireless adapter allows you to use the unit as a 
portable wireless receiver.

For details on attaching the unit, refer to the operating 
instructions supplied with the DWA-01D or DWA-F01D.

Settings

Setting the Receive Channel

For details about the channel groups and channels that can 
be selected, refer to the “Frequency List” on the 
CD-ROM.

To prevent interference and noise, beware of the 
following.
• Do not use multiple transmitters that have been set to 

the same channel at the same time.

• When using two or more channels at the same time, 

always configure different channels within the same 
group.

• Keep all transmitters and receivers at least 3 m away 

from each other.

1

Set the POWER 1 or POWER 2 switch to ON.

2

Press the MENU button to display the RX1 or RX2 
menu, and press the + or – button to display the GP/
CH screen.

3

Press and hold the SET button for 1 second or longer.

The channel group display starts flashing. 

4

Use the + or – button to select the desired group 
name, then press the SET button.

The channel group is set, and the channel number 
display starts flashing.

5

Use the + or – button to select the desired channel 
number, then press the SET button.

The displays stops flashing and the desired channel is 
set.

Receiver

Note