background image

1-3 (E)

UY
A-S90SF

(GB)

Features

The UYA-S90SF consists of the Slide Carrier to scan slides, mounted 135
film or IX240 film, with the UY-S90 film scanner, and the Auto Slide
Feeder to automatically load multiple slides one by one to the Slide
Carrier.
Using the Auto Slide Feeder, you can prescan and scan up to 50 slides
continuously.

Note

For details on the operation of the film scanner, refer to the Operating
Instructions and Software Manual supplied with the film scanner.

Checking the Package

This product consists of the following parts.  Check that nothing is missing
from your package.

Notes

• Retain the original carton and packing materials in case you have to

transport the parts in the future.

• Remove the slide carrier and the auto slide feeder when transporting the

film scanner.

Slide carrier (1)

Auto slide feeder (1)

Slide attachment (1)

Replacement rubber rollers (2)

CD-ROM (1)
Operating Instructions (1)
Software Licence Agreement  (1)
Warranty booklet (1)

(GB)

Mounting the Slide Carrier to the Film Scanner

Mounting the carrier

Insert the slide carrier into the film scanner as shown in the figure, and fold
down the handle to lock.  Then close the carrier cover.

Note

Be sure to close the carrier cover and lamp cover of the film scanner.  If
either cover is open, previewing and scanning cannot be performed.  Also,
opening the cover during previewing or scanning stops the operation.

Removing the carrier

Press the handle to unlock and lift the carrier.

Slide carrier

Summary of Contents for UYA-S90SF





















































Reviews:

Related manuals for UYA-S90SF