Troubleshooting the Notebook
45
4
Press
to select Exit, then press
to select Get Default Values. The
message “Load default configuration now?” appears.
5
Select Yes and press Enter.
6
Select Exit (Save Changes), and then press Enter. The message “Save
Configuration changes and exit now?” appears.
7
Select Yes, and then press Enter. The notebook restarts.
My notebook starts, but the message “Operating system not
found” appears and Windows does not start.
❑
If you have connected an external, optional floppy disk drive, make sure
there is no floppy disk in the floppy disk drive (non-bootable).
❑
If a non-bootable floppy disk is in a connected floppy disk drive, follow
these steps:
1
Turn off the notebook, and then remove the floppy disk.
2
Restart the notebook and confirm that Windows starts properly.
❑
If Windows still does not start, follow the steps below to initialize the BIOS:
1
Turn off the notebook.
2
Remove any peripheral devices connected to the notebook.
3
Turn the notebook back on.
4
Press the F2 key when the Sony logo appears. The BIOS setup menu
screen appears.
5
Press the arrow keys to select the Exit menu.
6
Press the arrow keys to select “Get Default Values” and then press Enter.
The message “Load default configuration now?” appears.
7
Select Yes, then press Enter.
8
Use the directional arrow keys to select “Exit” (Save Changes), and then
press Enter. The message “Save configuration changes and exit now?”
appears.
9
Select Yes, then press Enter. The notebook restarts.
✍
If this occurs on a regular basis, contact Sony PC Support (http://
www.sony.com/pcsupport/).
Î
Ð
Summary of Contents for Vaio GR150K
Page 27: ...1 VAIO Notebook Quick Start PCG GR150 150K PCG GR170 170K ...
Page 28: ...VAIO Notebook Quick Start 2 ...
Page 36: ...VAIO Notebook Quick Start 10 ...
Page 97: ......