Troubleshooting
111
1
Click Start, point to Settings, point to Control Panel, and then click the
System icon.
The System Properties dialog box appears.
2
Click the Device Manager tab. Double-click Network Adapter and then
select “Klsi USB-Ethernet Device Adapter.”
3
Right-click Property (this only appears if the port replicator is attached).
4
Click the Overall tab and then click the “Impossible to use in this hardware
profile” box.
(For Windows 2000)
1
Click Start, point to Settings, point to Control Panel, and then click the
System icon.
The System Properties dialog box appears.
2
Click the Hardware tab and then click the Device Manager button.
3
Double-click Network Adapter, right-click “Klsi USB-Ethernet Device
Adapter,” and then select Disabled.
My PC card is not working
❑
Make sure the PC card is compatible with Microsoft® Windows®.
❑
Use the Sony Notebook Setup utility to disable devices you are not currently
using.
❑
If you are using two PC cards, use the Sony Notebook Setup utility to disable
the devices you are not currently using.
Troubleshooting software
My software program stops responding or crashes
Contact the software publisher or designated provider for technical support. See
the “About Software” section of this manual.