Sony Not
e
book Us
er
G
u
id
e
Connecting peripheral devices
60
Inserting a diskette
To insert a diskette, proceed as follows:
1
Hold the diskette (1) with the label side facing up.
2
Gently push the diskette into the drive (2) until it clicks into place.
Removing a diskette
To remove a diskette, proceed as follows:
When you finish using the diskette, wait until the LED indicator (1) turns off and then press the Eject button
(2) to remove the diskette.
Before pressing the Eject button, make sure that the LED indicator is turned off.
If the diskette does not come out by pressing the Eject button, disconnect the floppy disk drive from the computer.
!
Do not press the Eject button while the LED indicator is on. It may damage the diskette.