Sony Not
e
book Us
er
G
u
id
e
Connecting peripheral devices
61
Removing the floppy disk drive
If the floppy disk drive is not removed properly, your system may crash and you may lose data that you did
not save before.
To remove the floppy disk drive, proceed as follows:
1
If your computer is off, you can directly unplug the USB cable from the computer.
2
If your computer is on, wait until the LED indicator turns off and double-click the
Safely Remove
Hardware
icon in the system tray.
3
Select the floppy disk drive and click
Stop
.
4
Click
OK
.
5
When you see the message
Safe to Remove Hardware
, you can unplug the USB cable from the
computer.
To carry your floppy disk drive when you have finished using it, fold the floppy disk cable into the compartment on the side of the floppy disk drive.
Connecting a CD-ROM drive
You can connect an i.LINK™ drive to your notebook to use as a CD-ROM drive for reading CD-ROMs, audio-
CDs and CD extras. See the section
Connecting an external i.LINK™ drive
for details.
Connecting a printer
You can connect a Windows-compatible printer to your computer to print documents.
Connecting a printer using the USB connector
You can connect a USB printer compatible with your version of Windows
®
to your computer.