1-11
Confidential
PCG-FX210 (UC)
1-5. Replacing Various Connectors on the MBX-50 Board
Replace the connectors of “5-3. Connector Section” as follows.
1. Removing the I/O Bracket
When removing the connectors of reference numbers 901, 902, 903, 904 and 169 (refer to page 5-7), remove the I/O
bracket first.
2. Removing the Various Connectors
Remove the PC card connector by removing the screws as follows.
The other connectors (Refer to page 5-7, 5-8) are connected by soldering, remove the soldering first then remove the
connectors.
MBX-50 Board
I/O Bracket
Screw (HEX) (X6) (Silver)
+B 2X4 (X2) (Silver)
PC Card Connector
MBX-50 Board
Screw (M2) 0 Number
P3 Kind (X2) (Black)