background image

Sony 

Notebook U

s

er Guide

Getting help

109

n

N

About the display

My screen does not display anything

Check that the power indicator on the front panel of the computer is on.

Check that the battery pack(s) are inserted properly and that they are charged. If using AC power, check 
that the connection to the mains is secure.

If you are using an external display, check that it is plugged into a power source and turned on.

Adjust the brightness of the screen.

The computer display may be in 

Standby

 mode. If so, press any key to activate the display. It will take a 

few seconds for the screen content to appear.

The computer display may be in 

Hibernate

 mode. If so, press the power button to activate the system. 

It will take a few seconds for the screen content to appear.

The display mode may be set to external display mode. Press and hold the 

<Fn>

 key while pressing 

<F7>

 

several times.

The screen image on my external display is not centred or sized properly

Use the controls on your external display to adjust the image.

The window I have just closed is still on the screen

Press 

<F5>

 to refresh the screen, or

Press the Windows

®

 key + 

<D>

 twice to clean up the screen.

I cannot switch from LCD display to TV and vice versa

If a DVD disc is inserted in the optical drive, remove the disc.

Summary of Contents for Vaio PCG-GRT Series


















































































































































Reviews: