VAIO® Notebook Quick Start
40
Removing a Memory Module
1
Turn off your notebook and disconnect all peripheral devices, such as your
printer.
2
Unplug the notebook and remove the battery packs.
3
After the notebook has cooled, loosen and remove the two screws with the
mark located on the bottom of your notebook. Use an appropriate
screwdriver.
4
Slide the LCD lock lever and lift the cover. Slide the keyboard toward the
LCD display, then lift it away slightly.
5
Lift the keyboard from the LCD display side, then gently turn it over on the
touchpad space. Be careful not to detach the cable when lifting the keyboard.
6
Touch a metal object (such as the connector panel on the back of your
notebook) to discharge any static electricity.
7
Slide the memory module out of the slot.
8
Gently replace the keyboard, then press it into your notebook. Be careful not
to detach the cable when lifting the keyboard.
9
Close the notebook cover, then tighten the screws on the bottom of the
computer.
Summary of Contents for Vaio PCG-R505DL
