Using an Optical Disc Drive
49
3
Push the disc onto the hub until the disc clicks into place.
4
Close the tray by pushing it gently. The BUSY indicator on the drive flashes
while your notebook reads data from the disc.
To remove a disc
When the notebook is in Standby or Hibernate mode, you cannot remove a disc
because the disc tray will not open. See “Controlling Power Management” for
more information.
1
After you finish using a disc, wait until the LED indicator turns off.
2
Press the Eject button to remove the disc.
3
If the disc does not come out when you press the Eject button, turn off the
notebook and insert a thin, straight object (such as a paper clip) into the
manual eject hole.
Make sure you seat the disc firmly over the hub fingers. If you do not seat the
disc firmly, you could damage the optical drive and you may not be able to
open the tray.
Inserting an optical disc
Disc
