Sony
Not
e
book
Com
p
ut
er
Us
er
Gui
d
e
Getting Help
Troubleshooting
69
When I remove the Memory Stick, an error message appears.
Insert the Memory Stick™ into the slot again and press the
Enter
key. Wait until
the active application finishes, then remove the Memory Stick™. If the message
confirms eject of the Memory Stick™, click
OK
.
About peripherals
I cannot use DV devices. The message
DV equipment seems to be disconnected or
turned off
appears.
Check that the DV device is turned on and that the cables are properly connected.
If you are using multiple i.LINK™ devices, the combination of the connected
devices may cause unstable operation. In this case, turn off the power to all
connected devices and disconnect unused devices. Check the connection and then
turn on the power again.
My PC card is not working
Make sure the PC card is compatible with your version of Windows
®
.
I cannot print.
Check that all the cables of the printer are correctly connected.
Check that your printer is correctly configured and that you have up to date
drivers If needed, contact your dealer.
The i.LINK device, which is connected to the computer, is not recognized, or a message
appears.
Disconnect the i.LINK™ device once, then connect it again.