Notes on Use
Adding Memory
Sony
Not
e
book
Com
p
ut
er
Us
er
Gui
d
e
74
6
Before you remove the module from its package, touch a metal part of the
computer to discharge any static electricity accumulated on your body. Remove
the module from its protective package.
7
Install the memory module by holding the module edge connector pointing down
and the notch on the right, and then insert it diagonally into an empty slot.
8
Lower the memory module until it clicks into place on both ends.
!
Do not touch any part of the
motherboard or the other
components inside the
computer.
1
Slide the memory module into the slot.
2
Snap the connectors into place when the board is correctly seated.
