background image

18

n

N

Using your VAIO computer

Hardware Guide

Using the mouse

The VAIO wheel mouse allows you to control the cursor in a number of ways. You can point to, select, drag and scroll objects on 
the screen using the buttons and the wheel. 

The mouse has the following functions:

You can adjust the mouse pointer speed and other functions under 

Mouse 

Properties

. To display 

Mouse Properties

, go to the 

Control Panel

, select 

Printers and Other Hardware

, then select 

Mouse

.

Button

Function

1

Left button

Click or double-click the left button to select items. To drag and drop items, hold 
the left button down while sliding the mouse, then release the button to drop the 
item.

2

Right button

Press the right button once to display a context-sensitive shortcut menu (not 
always an active function).

3

Central wheel

Turn the central wheel to scroll up or down a page. Press the wheel once to lock 
the scroll action and control the movement by moving the entire mouse. (The 
scroll function is available only with applications that support it).

Summary of Contents for VAIO PCV-C11M































































Reviews: