background image

Why doesn't my modem work properly? 

Your modem may be experiencing equipment or software conflicts. If your modem is not functioning properly, check the
following: 

Check that the telephone line is properly plugged into the modem line jack. 

Check that the telephone line is working properly. You can verify the line by plugging in an external device such as a
standard telephone or fax machine and listening for a dial tone. 

Check that the access telephone number (POP) is correct. 

All software programs that are preinstalled by Sony are compatible with your computer's modem. If you have
installed other software, contact the software publisher for information on how to configure the software in order to
recognize the modem. 

If it appears that your modem is not functioning properly, check the device status. 

1.

Click 

Start

 in the Windows taskbar, then click 

Control Panel

2.

Click 

Printers and Other Hardware

 and then select 

Phone and Modem Options

3.

From the 

Modems

 tab, click to select your modem. 

4.

Click 

Properties

. The 

Modem Properties

 window appears. 

5.

Review the information in the 

Device status

 section. If your modem is not working properly, click the

Troubleshoot

 button. The 

Help and Support Center

 window appears. 

6.

Follow the on-screen instructions to resolve the problem. 

The modem driver(s) may not be working properly. 

Page 138

Summary of Contents for Vaio VGCRA830





































































































































































Reviews: