VGX-XL1 Digital Living System
27
Chapter 2:
Setting Up the DLS System
Before You Begin
Before setting up your VGX-XL1 Digital Living System™, consider the
environment in which it will be placed. Listed below are some general
guidelines.
•
The maximum distance between XL1A computer and the keyboard can be
up to 30 ft.
•
Placing the keyboard near a metallic object may affect communication
between the keyboard and the computer.
•
Do not set up the VGX-XL1 DLS in the following locations:
- in direct sunlight
- near a magnet or a item that generates a magnetic field
- areas with high heat, such as near a heater
- areas with excessive heat, dust, and humidity
- areas with poor ventilation
Please observe the following items to avoid damage.
•
Always turn off the power before the device is moved. Damage may be
caused to the hard disk if the device is transferred or moved with the
power on.
•
Do not attempt to move the Media Changer/Recorder if there are discs
inside the carousel. Remove all discs from the optical drives (computer
and changer) before moving.
•
Do not tip or hit this device. Even a small impact or vibration may cause
some damage to your hard disk.
•
Do not set up where it is not secure.
•
Do not place an object over the ventilation holes.
•
If the XL1A computer and the XL1B Media Changer/Recorder are placed
in an enclosed entertainment cabnet, make sure there is sufficient airflow.
Chp2.fm Page 27 Thursday, November 10, 2005 11:49 AM
