40
VGX-XL1 Digital Living System
For better reception, if needed, you may mount the wireless LAN antenna to a
wall using the included screws.
Launch the Marvell
®
Client Utility Application. Select
Station
as the operation
mode. Then proceed to Windows Wireless Zero Configuration service to set
up your connection with your preferred Access Point.
For additional information about setting up a wireless LAN, go to Appendix A.
Step 5: Turning Power On
Make sure all hardware is connected and that power cables are plugged into
properly grounded electrical outlets (three pronged outlets).
Turn on the power to the computer, TV, and speakers.
Activate Wireless Keyboard Communication
1
From the front of the keyboard, slide the
Power
button to
On
.
2
From the back of the keyboard, slide the
Pointing Device
button to
On
.
3
From the back of the keyboard, and the front panel of the DLS computer,
press the Connect buttons simultaneously
and hold for a few seconds.
4
Test the keyboard to make sure it is functioning properly.
WARNING
: Do not turn on the power to the Media Changer / Recorder at this
time. (See Step 6.)
Chp2.fm Page 40 Thursday, November 10, 2005 11:49 AM
