Troubleshooting
9
What should I do if a BIOS error appears when I turn
on my computer?
On all models except VGC-RM series models, if the message “Press <F1>
to resume, <F2> to setup” appears at the bottom of the screen, follow these
steps:
1
Press the
F2
key.
The BIOS setup screen appears. If not, restart the computer and press
the
F2
key several times when the VAIO logo appears.
2
Set the date (month/day/year). Press the
Enter
key.
3
Press the
m
key to select
System Time
, and then set the time (hour:
minute: second). Press the
Enter
key.
4
Press the
,
key to select the
Exit
tab, and then press the
F9
key.
At the confirmation prompt, press the
Enter
key.
5
Select
Exit Setup
, and press the
Enter
key.
At the confirmation prompt, press the
Enter
key.
Your computer restarts.
If this occurs frequently, contact VAIO-Link.
On VGC-RM series models, if the message “Press <F1> to resume, <F2> to
setup” appears at the bottom of the screen, follow these steps:
1
Press the
F2
key.
The BIOS setup screen appears. If not, restart the computer and press
the
F2
key several times when the VAIO logo appears.
2
Set the date (month/day/year) with the
Tab
key and
+/-
keys.
3
Press the
m
key to select
System
Time
, and then set the time (hour:
minute: second) with the
Tab
key and
+/-
keys.
4
Press the
,
key to select the
Exit
tab, and then select
Load Optimal
Defaults
and press the
Enter
key.
At the confirmation prompt, press the
Y
key.
5
Select
Exit Saving Changes
and press the
Enter
key.
At the confirmation prompt, press the
Y
key.
Your computer restarts.
If this occurs frequently, contact VAIO-Link.
Summary of Contents for VGC-LM1E
