background image

123

Getting help

Getting help

This section describes how to get help and support if something goes wrong with your computer.

Sony offers you many support options for your computer.

Sony support options

Please see Documentation pack for details on the printed and online documentation delivered with your computer, as well as further 
sources of reference.

Other sources of information

Go to the online 

help files

 that accompany your software for instructions on using the software.

VAIO online support

: if you have any problem with your computer, you can access the VAIO online support for troubleshooting. 

Go to: 

http://www.sony.com/pcsupport

VAIO customer support help lines

: Before contacting VAIO customer support by telephone, try to solve the problem by reading 

the online and printed documentation.

Program Support Information

Depending on the computer model and particular configuration you purchased, your computer may not include all of the software 
programs listed below.

You need to set up an Internet connection before you can access the online features described here.

Summary of Contents for VGN-U750P VAIO















































































































































Reviews: