Sony VID-P110 Service Manual Download

Page: 15 / 82

1-9 (E)

VID-P110

Operations

OPEN

AUTO

IRIS

Adjusting the iris (Brightness) manually
(IRIS buttons)

Use the IRIS buttons on the operation panel to adjust
the iris (brightness). To increase the brightness, press
the OPEN button. To decrease the brightness, press the
CLOSE button. Adjust the iris manually when you
want to display:
• an object which reflects light strongly and the picture

looks whitish,

• a pale-colored film negative, or
• the contrast strongly.

To go back to automatic iris
Press the AUTO button to light the AUTO indicator.

Locking the white balance setting
(W.BALANCE buttons)

The VID-P110 automatically adjusts the white
balance. You can lock the white balance setting when
the object color is not displayed naturally. This is
useful when you display:
• a monochromatic material (including film negatives)

or background, or

• a pale colored material.
To lock the white balance setting, press the ONE
PUSH button. The white balance setting which adjusts
immediately before you pressed the button is held.
In the ONE PUSH mode, it locks the last automatic
white balance setting and maintains it even when the
lighting conditions change. This allows the color of the
material to be displayed naturally.

NEAR

FAR

AUTO

FOCUS

To recall the setting you preset

Press the PATTERN MEMORY 1 or 2 button.

Note

The setting you preset will be reset when you turn off
the power.

Adjusting the focus manually
(FOCUS buttons)

Use the FOCUS buttons on the operation panel to
adjust the focus. You can also adjust the focus for a
three-dimensional object by using the NEAR and FAR
buttons. Adjust the focus manually when you display:
• a material that includes small type or fine patterns

which are difficult to focus,

• a material of low contrast, or
• a three-dimensional object.
You can lock the focus when the focus is adjusted
automatically. Press the FAR or NEAR button once to
lock the focus.

To go back to automatic focus
Press the AUTO button to light the AUTO indicator.

B&W

NEGA

EFFECT

Setting the screen in monochrome mode
(EFFECT buttons)

To set the screen in monochrome, press the B&W
button. The B&W indicator lights to indicate that the
screen is now set to monochrome. We recommend that
you set the screen to monochrome when you display:
• a black and white material such as a black and white

document or a black and white film, or

• a material which includes small type such as a

newspaper and fine patterns.

To set the screen in color
Press the B&W button again. The B&W indicator
turns off and the screen is set to the normal color.

Note

When you shoot and display a finite pattern such as a
column of newsprint, it is recommended to set the
screen to monochrome and connect a monitor via the S
VIDEO OUT connector.

ONE PUSH

AUTO

W.BALANCE

B&W

NEGA

EFFECT

Arm lights

Back light

To go back to automatic white balance
Press the AUTO button to light the AUTO indicator
when you change the object to be shot or the color of
the material is not displayed naturally in the ONE
PUSH mode. The VID-P110 unlock the white balance
setting and adjust the white balance automatically.

Displaying film negatives
(EFFECT buttons)

The VID-P110 is automatically set to display normal
materials on the screen when you turn it on. Press the
NEGA button on the operation panel to display the
film negatives. The NEGA indicator above the button
lights, and the arm lights go off and the back light
comes on. The VID-P110 begins to display the
reverse picture of the film negatives.
To display film negatives more naturally, see also
“Locking the white balance setting (W.BALANCE
buttons)” (page 16).

To display a normal material on the screen
Press the NEGA button when the NEGA indicator is
lit. The NEGA indicator turns off and the arm lights
turn on.