SmartPanel Projector Driver Application Note
Sony VPL-CX10
© 2001 SP Controls Inc. 601 Minnesota Suite 115 San Francisco, CA 94107
help@spcontrols.com
The hidden functions available for the Sony with this Driver are as follows:
MENU
ENTER
PICTURE MUTE
ADJUST LEFT
ADJUST RIGHT
ADJUST UP
ADJUST DOWN
DIGITAL ZOOM +
DIGITAL ZOOM –
DIGITAL ZOOM RESET
D. Relays
The following table specifies the factory preset
settings for the low-current relays found on the rear
of the
SmartPanel.
The
Configuration Utility
can
be used to customize these settings your installation.
Relay 1
ON Maintained
Relay 2
ON Momentary
Relay 3
OFF Momentary
Selection
Momentary; not Binary
E. Other Presets
The following table specifies other default factory settings for this Driver that affect is control of the
Projector.
Power Status Feedback Method
None (see note 1)
Control Wiring Option
Wired Remote or IR Emitter
Control for the Sony with this Driver is entirely via Wired/IR Emitter. The projector is not controllable
through RS-232.
NOTE
: If the projector is controlled via Wired Remote it will no longer respond to the remote control.
The following table specifies settings for the Panel’s configurable timers. For more information on the
inactivity shutdown feature and the lockout timer see the
SmartPanel Configuration and Installation Guide.
Lockout Timer
60 seconds (see note 3)
Inactivity Shutdown
Disabled
RELAYS
PWR
ON
MAINT.
PWR
ON
MOM.
PWR
OFF
MOM.
1A
1B
3A
3B
2A
2B
4A
4B
6A
6B
5A
5B
7A
7B
SELECTION
(EXT. SWITCHER CTRL)
4
3
2
1
500mA MAX. CURRENT
