Sony VPL-CX75, Operating Instructions Manual

7

Overview

Note on Access Control

This unit cannot read 

Memory Stick

 that

has Access Control with other units. To
read/write data on the Access Control

Memory Stick

, unlock the 

Memory

Stick

 with the unit that has locked it.

Note on Memory Stick (with
memory select function)

• You cannot use all the available memory

at the same time and/or continuously.

• Do not use the memory select switch

while the 

Memory Stick 

is connected to

any compatible device that is compatible
for use with this feature, as this may
cause a malfunction. If you use the
memory select function while the

Memory Stick

 is connected to any

compatible device and there is a
malfunction, we will not honor the
guarantee.

• When using the memory select switch,

make sure to firmly move the switch to
the end. If you do not switch it
completely, it may cause a problem or
malfunction.

• Check your memory selection on

Memory Stick

 before inserting it into

the Memory Stick slot of the compatible
device.

• When you use 

Memory Stick

 with

memory select function, you can choose
the type of memory by switching the
memory select switch. As the compatible
device will only access the memory
selected by you, note the following:
– A formatting (initializing) process is

executed  for the selected memory only.

– Remaining memory display reflects

only selected memory information.

– Error display reflects only selected

memory information.
Each memory is handled individually
by selecting it.

On MagicGate

MagicGate is copyright protection
technology that uses encryption technology.

Format to save a file

Material for a presentation converted by the
Projector Station for Presentation is saved
in the following file formats in the

Memory Stick

.

• Image files (DCF-compatible)

compressed in the JPEG (Joint
Photographic Experts Group) format
(extension .jpg).

• The Sony Projector Presentation file (SPP

file), which is an original file format of
Sony. This file integrates information
such as destination and setting
information of the image file, etc.

Before using a Memory Stick

• When you set the 

Memory Stick

erasure prevention switch to 

Lock

, data

cannot be recorded, edited, or erased.

* Some 

Memory Sticks

 (

Memory Stick

Duo

) are not equipped with an erasure

prevention switch. When using a

Memory Stick

 without an erasure

prevention switch, be careful not to edit or
erase data by mistake.

• Use a sharp object, such as a ballpoint

pen, to move the 

Memory Stick Duo/

Memory Stick PRO Duo

 erasure

prevention switch.

• Data may be damaged if:

– You remove the 

Memory Stick

 or

turn off the unit while it is reading or
writing data.

– You use the 

Memory Stick

 in a

location subject to the effects of static
electricity or electric noise.

• We recommend that you make a backup

copy of important data that you record on

Memory Stick

.

About a 

Memory Stick

Terminal

Write-
protect
tab

Labeling
position

(Continued)