12
Location and Function of Controls
c
KEYSTONE (Trapezoidal
distortion correction) key
Adjusts the vertical trapezoidal
distortion of the image. Pressing this
key, the adjustment menu are displayed.
Use the arrow keys (
v
/
V
/
b
/
B
) for
adjustment.
d
RESET key
Resets the value of an item to its factory
preset value or returns the enlarged
image to its original size. This key
functions when the menu or a setting
item is displayed on the screen.
e
PIC MUTING key
Cuts off the picture. Press again to
restore the picture.
f
FREEZE key
Freezes the projected picture. To cancel
the frozen picture, press the key again.
g
D ZOOM (Digital Zoom) +/– key
Enlarges the image at a desired location
on the screen.
h
Infrared transmitter
i
?
/
1
(On/Standby) key
j
v
/
V
/
b
/
B
(Arrow) keys
k
ENTER key
l
MENU key
m
/– keys
Before using the Remote
Commander
Pull out the clear film from the lithium
battery holder.
To replace a battery
1
Release the lock of the lithium battery
holder by picking it, and pull out the
holder from the Remote Commander.
2
Install the lithium battery.
3
Put the lithium battery holder back
into the Remote Commander.
Notes on the lithium battery
• A button type lithium battery (CR2025) is
used in the Remote Commander. Do not
use batteries other than CR2025.
• Keep the lithium battery out of the reach of
children.
• Should the battery be swallowed,
immediately consult a doctor.
Notes on Remote Commander
operation
• Make sure that nothing obstructs the
infrared beam between the Remote
Commander and the remote control
detector on the projector. Direct the
Remote Commander toward the remote
control detector.
• The operation range is limited. The shorter
the distance between the Remote
Commander and the remote control
detector is, the wider the angle within
which the commander can control the
projector becomes.
Face the +
side up.
