33
The Installation Menu
A
d
ju
s
tm
e
nt
s an
d Set
tin
g
s
U
s
in
g a M
enu
Installation Attitude
Link to Image Flip/Right Side Up/Upside Down/Front Down/Front Up/
Portrait 1/Portrait 2:
Change the cooling setting to suit to the installation
attitude. When set to “Link to Image Flip,” the cooling setting changes
based on the setting of “Image Flip.”
*7
Continuing to use the wrong setting
may affect component reliability.
High Altitude Mode
On/Off:
Set to “On” when using the projector at an altitude of 1,500 m or
higher. Continuing to use the wrong setting may affect component
reliability.
Screen Aspect
16:10/16:9/4:3:
For switching the display area to suit to the screen.
Panel Alignment
*9
This feature allows you to adjust the gaps in the color of characters or the
picture.
When set to “On,” “Adjust Color” and “Pattern Color” can be assigned and
adjusted.
Adjust Item:
Selects how to make adjustments from below.
Shift:
Shifts the whole picture and makes adjustments.
Zone:
Selects the desired range and makes adjustments.
Adjust Color:
Assigns the desired color to adjust the gaps in color. Select
“R” (Red) or “B” (Blue) to make adjustments based on “G” (Green).
Pattern Color:
Select “R/G” (Red and Green) or “R/G/B” (White, all
colors) when “Adjust Color” is “R” (Red). Select “B/G” (Blue and Green)
or “R/G/B” (White, all colors) when the “Adjust Color” is “B” (Blue).
Adjust:
The shift adjustment and zone adjustment of the color selected in
“Adjust Color” can be made with
V
/
v
/
B
/
b
keys.
Reset:
The panel alignment settings are initialized to their factory preset
values.
Setting items
Description
Horizontal installation
Right Side Up
Upside Down
Front Down
(Projects
downward)
Front Up
(Projects
upward)
Vertical installation
Portrait installation
Portrait 1
*
8
(The
buttons of the
unit face up)
Portrait 2
*
8
(The
buttons of the
unit face down)
Summary of Contents for VPL-FHZ700
Page 63: ...Sony Corporation ...
