18
Using the Signage Web Manager
Information screen
This screen shows the model name, serial
number, and other display and player
information, as well as the power status and
the input signal selection.
The screen is for information only. There are
no items that can be set.
Display screen
Control
POWER
Switches the display on or off.
INPUT
Lets you select the input signal.
Refresh
Updates the screen with the latest
information.
For information on display models with power
control functions, refer to the specification
document on the CD-ROM (Software &
Manuals for Digital Signage Player).
Timer
Timer
Lets you make settings for the timer
function.
Click the “Apply” button when done.
Before setting the “Timer” function, make sure
to configure the time setting on the Setup
screen.
Setup screen
The “Setup” screen appears. This screen lets
you set up the Network Password. The
factory default settings are as follows:
Name: root
Password: bz10ad
After you have made any changes or entered
information, click the “Apply” button at the
bottom of each screen to enable the settings.
Special characters cannot be used in the text
fields.
To prevent access to the player from the
Signage Player Management Software, we
recommend changing not only these settings
Configuring Status Display,
Control, and Setup for the
Display and Player
Note
Note
Summary of Contents for VSP-BZ10
Page 39: ...Sony Corporation ...
