Sony VX-2000
Adjusting Exposure Manually:
For use in unusual lighting.
1. Set the
AUTO LOCK
switch to the
center position.
2. Press the
EXPOSURE
button, the exposure
indicator appears in the viewfinder.
3. Turn the
EXPOSURE DIAL.
To brighten
the picture, adjust the level to the + side.
4. To return to automatic exposure mode set the
AUTO LOCK
switch to the
Auto Lock position
or press the
EXPOSURE
or the
PROGRAM
AE
button.
Adjusting Shutter Speed Manually:
1. Set the
AUTO LOCK
switch to the center
position. If the
PROGRAM AE
indicator is
lit in the viewfinder, press the
PROGRAM AE
button repeatedly until the indicator disappears.
2. Press the
SHUTTER SPEED
button. The
shutter speed indicator appears in
the viewfinder.
3. Turn the
SEL/PUSH EXEC
dial to select
the desired speed. The shutter speed ranges
from 1/4 to 1/10000.
4. To return to automatic shutter speed mode,
set the
AUTO LOCK
selector to Auto Lock,
or press the
SHUTTER SPEED
button. The
shutter speed indicator disappears from the
viewfinder.
Using the ND Filter:
The Neutral Density Filter can allow you to
shoot clearly even under too bright conditions.
ND Filter setting 1 corresponds to 1/4 of the
quantity of light, and ND Filter setting 2 cor-
responds to 1/32. It is recommended that you
set the ND filter in standby mode, as it can cause
audio and video noise during recording.
1. When the
ND1
or
ND2
indicator flashes in
the viewfinder, set the
ND FILTER
switch to the
corresponding setting.
2. When the
ND OFF
indicator flashes in the
viewfinder, the filter is not necessary. Set the
ND FILTER
switch to off.
Using the Program AE function:
You can select from five AE (auto
exposure) modes:
Aperture Priority: Select the aperture manually
to determine best depth of field. Gain and shut-
ter speed are set automatically for
best exposure.
Shutter Speed Priority: Select shutter speed
manually. Exposure is set automatically.
Sports: For capturing high speed action at
a distance.
Sunset and Moon: For capturing sunset, night
views, fireworks, neon signs, etc.
Low Lux: For capturing a subject in insufficient
light. Subject becomes bright.
1. Set the
AUTO LOCK
switch to the center
position.
2. Press the
PROGRAM AE
button, the indica-
tor appears in the viewfinder.
3. Turn the
SEL/PUSH EXEC
dial to select the
desired auto exposure mode. Press the
SEL/
PUSH EXEC
dial to select.
4. In aperture priority or shutter speed priority
modes turn the
SEL/PUSH EXEC dial
to select
the aperture value or shutter speed, respectively.
PROGRAM AE
button
AUTO LOCK
switch
SEL/PUSH EXEC
dial
EXPOSURE
button
EXPOSURE
dial
SHUTTER SPEED
button
ND FILTER
switch
4